Genuine Used Toyota C-HR / IZOA Rear Tail Light Assembly Set of 4 – Pre-Facelift & Facelift Available (Upgradeable)
Product Details
| Part Condition:: | Used / Genuine OEM Take-off | Chassis Code:: | ZYX10 / NGX10 / NGX50 |
|---|---|---|---|
| Model Year Range:: | 2016–2019 (Pre-Facelift / Standard Grade) OR 2019.10–2022 (Facelift / LED Grade) — Select Based On Stock | Retrofit Harness:: | Available For Early To Late Upgrade — Please Specify If Needed |
| Tail Light Type:: | Standard (Pre-Facelift) / Full LED (Facelift) | Warranty Type:: | Functional Guarantee Only (No Aesthetic Warranty For Used Items) |
Product Description
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled Toyota C-HR / IZOA (ZYX10/NGX50 chassis, compatible with 2016-2022 model years). The set includes all four pieces of the split-design tail light assembly.
Set Includes: 1x Left Outer (Quarter Panel), 1x Left Inner (Liftgate), 1x Right Outer (Quarter Panel), 1x Right Inner (Liftgate) — 4 pieces in total.
Condition:
-
100% OEM genuine Toyota parts (Not aftermarket/reproduction).
-
Fully tested for all lighting functions (Brake light, Turn signal, Tail light, Reverse light) prior to removal.
-
Outer lenses are free from cracks or breaks. Housing and all mounting tabs/clips are intact and undamaged.
-
Minor surface wear from normal vehicle usage may exist, but no structural or functional defects.
-
LED light sources included and fully functional (spec depends on trim level).
Available Specifications:
-
Pre-Facelift (Standard Grade): Traditional halogen/standard lighting; earlier version tail lamp design.
-
Facelift (LED High Grade): Full LED internals with distinctive illuminated strip design, fitted to 2019.10+ models with factory premium taillights.
Important Upgrade / Fitment Note – Retrofit from Pre-Facelift to LED Facelift:
| Installation Component | Compatibility Note |
|---|---|
| Outer Tail Lights | The outer lamps are typically plug-and-play using the original vehicle connector. |
| Inner Tail Lights | Requires a conversion harness as the low-spec/early models use a different connector configuration. Inner lights need additional wiring for reverse signal and low beam power. |
| Turn Signal Function | A resistor/decode is required for the LED turn signals to prevent hyperflashing (fast blinking) on non-LED vehicles. |
| Power Source | The inner lights may need to tap into the license plate light circuit for full function. |
With the correct conversion harness and decoder, early model C-HR/IZOA can be upgraded to the later LED facelift tail lights without cutting or splicing factory wires. Please inquire about harness options when ordering.
Product Highlights
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled Toyota C-HR / IZOA (ZYX10/NGX50 chassis, compatible with 2016-2022 model years). The set includes all four pieces of the split-design tail light assembly. Set Includes: 1x Left Outer (Quarter Panel), 1x Left ...
Genuine Used 2009-2019 Lexus LX570 Rear Tail Light Assembly Set of 4 (Left Outer + Left Inner + Right Outer + Right Inner)
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled Lexus LX570 (2009-2019 model years). The LX570 features a 4-piece split design : outer lights mounted on the quarter panel and inner lights mounted on the liftgate. Set Includes: 1x Left Outer, 1x Left Inner, 1x ...
Genuine Used Lexus LX570 Facelift Rear Tail Light Assembly Set of 4 – Available with Dynamic/Sequential Turn Signal or Standard
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled facelift Lexus LX570 (compatible with 2016-2021 model years). The facelift LX570 features a 4-piece split design : outer lights mounted on the quarter panel and inner lights mounted on the liftgate. Set Includes...
Genuine Used Latest Honda CR-V Rear Tail Light Assembly Set of 4 – Available with Dynamic/Sequential or Standard Turn Signal
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled latest generation Honda CR-V (compatible with 2023-2026 model years). The latest CR-V features a 4-piece split design : outer lights mounted on the quarter panels and inner lights mounted on the liftgate. Set ...
Genuine Used Honda Odyssey (RC3) Rear Tail Light Assembly Set of 4 (Left Outer + Left Inner + Right Outer + Right Inner)
This is a GENUINE ORIGINAL USED rear tail light assembly set removed from a disassembled Honda Odyssey (Chassis Code: RC3). The 5th generation Odyssey (RC3) features a 4-piece split design : outer lights mounted on the quarter panels and inner lights mounted on the tailgate . Set Includes: 1x Left ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
